27 STEPS
1. Welcome to the Readyset Surgical Tutorial. This tutorial will demonstrate how to Check-in a tray at the kiosk.
2. Click I am a courier
3. Click in the first field (First Name) and enter your name.
4. Click in the first field (Last Name) and enter your name.
5. In the Employer Field enter your company name
6. In the Surgical Vendor field, type in the VENDOR company.
NOTE: Select from the drop down
7. Click Continue
8. Click Checking in
9. If you have a QR Code, you may select Scan QR Code and proceed to check in the trays .If the QR code is not applicable, click Search for Case
10. Click highlight
11. Select the date of the surgery
12. In the Sales Rep field, type in the name of the Sales Rep and select from the drop down.
13. In the Surgeon field, type in the name of the surgeon and select from the drop down
14. Click Find Cases
15. Locate your case and select Check-in
16. If you cannot find your case, it may have already been checked in. Select the Show Checked-in toggle Switch to see trays that were checked in.
17. Again, once you find your case, select Check-in
18. For the first tray, select Check-in
19. Under normal operating procedures, the scale will record the weight of the image. For demonstration purposes, we'll show you have to record the weight manually.
Select Enter Manually
20. Click in the weight field and enter the weight
21. Place the tray on the scale and select Capture Image
22. Click Accept & Continue
23. Repeat for the remaining trays.
24. When all trays and levels are captured, select Complete Check-in
25. Scroll and click Print Labels
26. That's it. You're done.
27. Congratulations! You just completed the tutorial!
If you have any questions or need further assistance, please contact our 24/7 support line at (833) 777-8776.
